™
The Guardian
Link (3) transmitter is compatible only with the Guardian
glucose sensor as part of a continuous glucose monitoring (CGM) system for insulin
pumps. The transmitter collects data from the sensor. The transmitter then wirelessly
sends the data to the insulin pump.
serter
Guardian Link (3) transmitter kit components
A complete transmitter kit includes the following components:
•
Guardian Link (3) transmitter (MMT-7811)
•
Two testers (MMT-7736L)
Indications for use
The Guardian Link (3) transmitter is intended for use with the Guardian Sensor (3).
The transmitter powers the glucose sensor, collects and calculates sensor data, and
wirelessly sends the data to a pump. The transmitter is intended for single-patient or
multiple-patient use.
Contraindications
None known.
Warnings
• Do not use the transmitter adjacent to other electrical equipment which may
cause interference with the normal system operation. This includes mobile
communication devices such as cell phones, GPS navigation systems, and other
devices that have an output transmitter power greater than 1W. Other electrical
equipment that may compromise normal system operation has been
contraindicated. For more information, see Exposure to magnetic fields and
radiation, on page 2.
tester
transmitter
•
Charger (MMT-7715)
•
One-press serter (MMT-7512)
-1-
™
Sensor (3)
charger