DRYING RACK (OPTIONAL
PART)
Installing and using the drying rack
1. Open the dryer door.
2.
Position the drying rack in the tumbler,
placing the front lip of the drying rack on top of the lint
filter.
3.
Place the rear legs in the two recessed
areas of the dryer's back wall, and then push down
the middle of the drying rack to fix.
4.
Place the items to be dried on the rack, leaving space between
them so air can circulate.
5. Close the dryer door.
6.
Use the Time Dry cycle. Select the time according
to the moisture
and weight of the items.
Start the dryer. It may be necessary
to reset the timer if a longer drying time is needed.
Washable
sweaters
Extra Low (Time Dry cycle)
(block to shape and lay flat on rack)
Stuffed toys
Extra Low (Time Dry cycle)
(cotton or polyester
fiberfilled)
Stuffed toys
Air Fluff
(foam or rubber-filled)
Foam rubber
pillows
Air Fluff
Sneakers
Air Fluff
Z_
Drying foam rubber, plastic, or rubber on a heat setting
may cause damage
to the item and
.......
create a fire hazard.
_
rying Rack is not supplied
in this model. The Drying Rack is optional.
You can purchase
it
through
a Samsung
service center. (Part code : DC61-02773A)
English o 25
DV3614000E(G)
030641)
00
EN
150416illdd
Sec5:25