QSC PLD Serie Manual De Instrucciones página 133

步骤 2 — 为扬声器分配选择输出通道
OUTPUTS
Output: A
Imped: 8.0
Power: 625
- - - -
Spkr:
Assign
步骤 3 — 为通道选择扬声器类型
OUTPUTS
Output:
Speaker:
WL2102 BiLFNS
2-Way LF
Band:
80 Hz
Filter:
ASSIGN
步骤 4 — 选择"用户预配置编号"
OUTPUTS
User Preset Number:
New Preset Name
C o n
Edit preset number or press EXIT
步骤 5 — 分配新用户预配置名称
OUTPUTS
New Preset Name
M y
Edit preset number or press EXIT
SPEAKERS SAVE
B C D
8.0 8.0 8.0
625 625 625
- - - - - - - - - - - -
Assign Assign Assign
SPEAKERS SAVE
A
SPEAKERS SAVE
21
f i g - A
SAVE
SPEAKERS SAVE
User Preset Number: 21
P r e s
SAVE
为每个输出端设置阻抗和功率后，继续
When you are finished setting
滚动并访问"扬声器"标签栏。
the Impedance and Power for
each output, continue to scroll
扬声器分配是可选的，您可以将扬声
to access the SPEAKERS tab.
器分配至一个或多个通道，也可以不
分配。
Loudspeaker assignment is optional,
you can assign a loudspeaker to one
or more channels, or none at all.
根据选择的扬声器选择频带
Band and Filter
和过滤器。在选择频带和
selections are based on
过滤器前，您必须选择一个
the Speaker you select.
You must select a
扬声器。
loudspeaker before
selecting Band and Filter.
To assign the speaker to the output channel, press
选择扬声器后，继续滚动并
When you have finished
访问"保存"标签栏。
selecting loudspeakers,
continue to scroll to
access the SAVE tab.
Scroll to New Preset Name
表明编辑
Indicates editing
表明"扬声器配置文
Scroll to desired letter position
Indicates "New
件名称"选择
Preset Name"
selection
Turn to select desired character
多达 21 个字符
Up to 21 characters
A - Z / a - z / 0 - 9 / A - Z / a - z / 0 - 9 /
When finished, scroll to SAVE
_ / - / space _ / - / space
17
滚动并选择输出通道
Scroll to select Output channel
要分配扬声器，按下
To Assign a loudspeaker, press
继续步骤 3
Continue to Step 3.
要编辑扬声器，按下
To edit Speaker, press
滚动并选择一个扬声器模型
Scroll to select a Speaker model
To confirm, press 要确认，按下
滚动并选择（频带、过滤器）
Scroll to select (Band, Filter)
要编辑，按下
To edit, press
Turn to adjust parameter 跳转至调整参数
要确认，按下
To confirm, press
滚动并选择"分配"
Scroll to select ASSIGN
要将扬声器分配至输出通道，按下
滚动至保存屏幕
Scroll to the Save screen
要编辑"用户预配置编号"，按下
To edit User Preset number, press
跳转至调整参数
Turn to adjust parameter
To confirm, press 要确认，按下
滚动至"为预配置命名"
滚动至所需字母位置
跳转至选择所需字符
完成后，滚动至"保存"
TD-000368-05-A
ENTER
ENTER
ENTER
ENTER
ENTER
CH
ENTER
ENTER
ENTER
press 按下
ENTER
按下
press
ENTER
按下
press
ENTER
按下
press
ENTER