QSC PLD Serie Manual De Instrucciones página 18

Create New Preset from an Existing Preset
To create a preset from an existing preset, recall the preset with the desired output configuration, modify the Input parameters, Output parameters,
then save the preset. In addition, you can save the preset as you are going thru the creation process.
Recall a Preset
A Preset includes the output configuration, input parameters, and loudspeaker profiles (DSP, load, and assignments). There are 20 factory presets that
can be recalled, but not overwritten.
• Factory presets F1: thru F9: contain output configurations only.
• Factory presets F10: thru F20: contain the output configurations and basic DSP for the configurations.
• There are 50 user presets that can be recalled and overwritten.
HOME > PRESETS > PRESET RECALL > ENTER
Step 1 — Select Preset
F1: Config - A B C D
F1: Config - A B C D
EN
1 A
Input
Step 2 — Confirm Selection
F1: A B C D
F18: Triamp - A+B C D
1 A+B
Press ENTER to confirm selection
TD-000368-00-A
2 B 3 C 4 D
Sub LF MF HF Full
3 C 4 D
Indicates more Presets
To select the Preset con guration, press
The message at the bottom changes to: "Recalling Preset now... "
You may hear relays clicking
18
Scroll to desired Preset
20 Factory, 50 User-defined
To con rm the selection, press
ENTER
ENTER