Setup Menu; Capacity Unit; Range - OHAUS Defender 5000 Manual Del Usuario

Defender 5000 Indicators

3.4 Setup Menu

When the Indicator connects to a scale base for the first time, enter this menu to set the Capacity
Unit, Range, Capacity and Graduation. Default settings are bold.
Setup

Capacity Unit

Range

>|1|< Capacity
>|1|< Graduation
>|2|< Capacity
>|2|< Graduation
Language
Power On Zero
Power On Unit
Key Beep
Beep Volume
Transaction Counter
Next Transaction
Password
Set Password
Confirm Password
Reset
3.4.1 Capacity Unit
Select the unit used for calibration.
Kg
t (Metric Tonne)
lb
ton (Short Ton)
g
3.4.2 Range
Set the number of weighing intervals in the weighing interval
The TD52 terminals can be configured to use single or dual interval. Each interval can be assigned
its own graduation. If dual interval is selected, the graduation will change when the weight reaches
the second interval.
When Single interval is selected, the additional parameters available are:

>|1|< Capacity

>|1|< Graduation
When Dual interval is selected, the terminal functions with two intervals, each with its own capacity
and graduation. In addition to the Interval 1 capacity and graduation parameters, the following two
parameters are available:

>|2|< Capacity

>|2|< Graduation
Options
g, kg, t (Metric Tonne), lb, ton (Short Ton)
Single Interval, Dual Interval
1-999999
0.0001~100
1-999999
0.0001~100
English, French, German, Italian, Spanish,
Chinese, Japanese, Korean, Russian,
Polish
Off, On
Auto, kg, lb, g, oz, lb:oz, t (Metric Tonne),
ton (Short Ton), c
Off, On
Low, High
Off, On
1-9999999
Off, On
xxxxxx
xxxxxx
EN-21