Operation; Before First Use; Switching On; Switching Off - Gaggenau VR 414 Instrucciones De Uso

Ocultar thumbs Ver también para VR 414:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

Before first use

Please observe the following notes before grilling on
your new appliance for the first time:
1
Thoroughly clean the appliance and accessories.
2
Take the lava stones out of the plastic wrapping and
pour them into the lava stone trough.
3
Tilt down both heating elements. The heating
elements must lie flat.
4
Place the cast grill onto the heating elements and
heat up the grill on level 12 for some minutes. This
will eliminate any 'newness' smells and soiling.

Switching on

Note: The appliance features independently controlled
heating elements. This allows it to simultaneously grill
foods which need different grill settings.
1
Press down the control knob and turn it to the
required level. If you grill only a small amount of
food you have the possibility to switch on only the
front or the rear grill heating element.
2
The luminous disc behind the control knob flashes.
When the temperature is reached, the luminous
disc lights constantly. Pre-heating the grill to
level 12 will take approx. 15 minutes.
3
After preheating, place the food on the grill.

Switching off

Turn the control knobs to 0.
m
Risk of burns!
When the appliance cover is closed, heat will
accumulate. Only close the appliance cover when the
appliance has cooled down. Never switch the appliance
on with the appliance cover closed. Do not rest food on
the appliance cover or use it to keep food warm.
8

Residual heat indicator

The luminous discs behind the control knobs flash after
switching off, to indicate that the appliance has still not
cooled down to such an extent that it can be touched
safely.

Overheating protection

To protect the appliance and the furniture, the grill
switches the heating elements off automatically when
overheated. After having cooled down, the appliance
switches on again.

Operation with the cast roaster

The cast roaster is particularly suitable for preparing
chopped or liquid foods, vegetables, sweets and egg
dishes.
Place the cast roaster on the rear heating element after
taking of the rear cast grill. You can grill on the front
cast grill simultaneously while grilling on the cast
roaster.
You can order additional cast roasters from your
specialist dealer (large or small).
Note: Do not take out the lava stone trough and the lava
stones when operating the grill with the cast roaster.
Grilling with the cast roaster:
1
Take off the rear cast grill.
2
Carefully place the cast roaster on the rear grill
heating element.
3
Turn the rear control knob to level 12. Preheat the
grill until the heating up signal goes off.
4
Brush some oil onto the cast roaster and place the
food onto the roaster.

Publicidad

Tabla de contenido
loading

Tabla de contenido