02Centrixx_Retro_gb.book Seite 30 Freitag, 16. Mai 2008 12:40 12
3 Operating
3.2 Refill the water tank
3.3 Switching off and
retracting the power
cable
1
2
3.4 Storage
2
30
You can simply refill the water tank between cleaning
sessions. To do this, turn the appliance off and remove the
mains plug. For further information, see
"Cleaning" Point 2-8.
1. Switch off the steam cleaner using the on/off switch
(Fig. 14/1) and pull the plug out of the socket.
2. Take the plug in your hand and hold it firmly.
WARNING:
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
3. Press the cable retract button (Fig. 14/2) to pull in the
power cable. Guide the last part with the plug by hand.
Fig. 14
4. Allow the steam cleaner and above all the accessory to
cool down before putting it away.
When working with the floor nozzle, you can use the
parking mount (Fig. 15/1) on the back of the steam cleaner
to store it or during work breaks. This is where you can hook
the parking hook (Fig. 15/2) onto the jointed connection.
WARNING:
If you leave your work area, switch off the appliance and
observe the instructions under
1
off and retracting the power cable". This will help avoid
accidents.
Fig. 15
ATTENTION:
Never position the appliance directly against heat
sources (e.g. heating, oven). Avoid direct sunlight. Heat
can damage the appliance.
Empty the water tank before putting the appliance away
Chapter 3.1, "Cleaning" Points 2-5.
Store the appliance in a cool, dry room.
Chapter 3.1,
Chapter 3.3, "Switching