Maintenance; Decommissioning; Spare Parts Service; Warranty Conditions - Schneider Airsystems FP-A Manual De Instrucciones

Ocultar thumbs Ver también para FP-A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
Depending on the type, manual or auto-
matic operation of the grease gun is
possible:
Manual operation:
Each time the trigger lever (item 02) is
pulled, a shot of grease is dispensed.
Automatic operation:
Pulling the trigger lever (Pos. 02) dispenses
grease in shots until the trigger is released.
Shots become slower and come to a stop as
soon as the grease chamber is filled.
After use:
1. Disconnect the quick-action coupling
from
the
plug
(Figure 1b).
2. Clean and store the device in dry condi-
tion.
2.5

Maintenance

Regular lubrication is required!
Oil using a maintenance unit
with filter pressure reducer and mist oiler.
For long breaks in operation, also oil via
plug nipple (item 01) using special oil for
compressed air tools.
nipple
(item 01)
2.6

Decommissioning

Storage: Clean, dry, free from dust, above
5° C.
Disposal: Dispose of packaging / machine
according to valid statutory regulations.
2.7

Spare parts service

Visit
our
website
tems.com/td/ for the latest version of all ex-
ploded drawings and spare parts lists for our
products. If you have any special questions,
please consult the Schneider Airsystems Ser-
vice centre in your country (addresses in the
service appendix) or your local dealer.
2.8

Warranty conditions

Basis for warranty claims: complete unit
in original condition/proof of purchase.
According to legal provisions, you re-
ceive the following warranty against
material and manufacturing defects:
private use only: 2 years,
commercial use: 1 year.
Excluded from warranty claims: Wear or
expendable parts, improper use, overloading
/ incorrect pressure, manipulation / inappro-
priate use, inadequate / incorrect / lack of
maintenance or lubrication, bumps / im-
pacts, dust / dirt accumulation, unauthorised
/ incorrect working procedures, incorrect
power supply, impure / insufficiently filtered
compressed air, failure to read the instruc-
tion manual, incorrect operating resources /
materials.
FP
www.schneider-airsys-
II/ 9
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

D 040026

Tabla de contenido