Schneider Airsystems FP-A Manual De Instrucciones página 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Air requirements per stroke at 6 bar
Output pressure
Pressure ratio
Grease hose with 4-claw coupling (length)
Vibrations as per DIN ISO 8662
Pulse sound pressure level L
as per DIN 45 635, part 20
Overall dimensions (without hose) width x depth x height
Recommended hose diameter (inner) at L= 10 m
Maximum cartridge length
Maximum cartridge weight
Weight
1.5 Components
01 Plug nipple (non-locking)
02 Trigger lever
03 Venting valve
04 Grease hose
05 Grease reservoir
06 Filling nipple
3
3
3
3
3
3
4
(at distance of 1 m)
pa
Note: Read and memorise part 2 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.2 Scope of delivery
– Grease gun
– Grease hose
– Instruction manual
1.3 Conventional use
The manual compressed air
grease gun
is an industrial tool designed for:
Lubricating components on vehicles, ma-
chines, transport and conveyor systems.
Any other type of use is considered contrary
to the intended use.
396 x 61,5 x 190 mm
07 Handle piece
08 Safety lever
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
GB
FP-A
8 l/min
6,3 bar
0,6 - 6,3 bar
0,6 l/stroke
Max.400 bar
1 : 40
450 mm
2
0,41 m/s
80 dB(A)
6 mm
220 mm
400 G
1,5 kg
I/ 3