Additional Components - Kreg Jig HD Guia De Inicio Rapido

Additional Components

Face Clamp
TM
Perfectly fl ush Kreg Joints , in no time.
TM
For best results, center the Face Clamp™
pads on the joint line. To keep the workpieces
perfectly fl ush, make sure the large clamp
pad is on the face side of the joint (opposite
the pocket-holes). Clamp fi rmly to reduce the
possibility of workpiece movement.
Kreg Jig ® Base
The Kreg Jig HD is compatible with the
®
Kreg Jig and Kreg Jig Master System
® ® ® ®
bases. Simply remove the Stop Block from
the Kreg Jig ® HD Drill Guide, slide it into the
base, and secure it with the drill-guide pin.
Now you're ready for convenient bench-
top production drilling. The Dust collection
attachment in the Master System helps
you keep a clean shop, and by effi ciently
removing chips, enables faster drilling and
extends the life of your drill bit.
800-447-8638
For more detailed instructions, please
visit us online at www.kregtool.com.
Additional Components
Kreg Jig ® HD Driver Bit
(Item no. D6HD)
Replacement 6"-long #3 square drive bit.
Kreg Jig ® HD Drill Bit
(Item no. KJDHD)
Replacement drill bit, stop collar, and hex
wrench.
Kreg Jig ® HD Screws
30-count screws
(Item# SML-C2X250-30)
125-count screws
(Item# SML-C2X250-125)
www.kregtool.com