Adjusting Volume; Switching Rotary Modes; Creating A Shortcut - Eclipse CD7100 Manual Del Propietário

Introduction

Adjusting volume

1
Turn the [VOL] button.
Turn to the right:Increases the volume.
Turn to the left: Decreases the volume.
ATTENTION
Press the [MUTE/Area Shot] button for less
than one second to cut the volume or restore it
instantly.
CAUTION
Do not adjust the volume or other controls
while driving the vehicle. Do so only while
parked in a safe location.

Switching Rotary Modes

The function of the [VOL] button can be switched.
When rotary mode is set to ON, the [VOL] button
can be switched from normal volume adjustment
to the following functions:
Source
FM/AM TUNE UP/DOWN
CHANNEL UP/
XM
CHANNEL UP/
SIRIUS
CDP/CDC TRACK UP/DOWN
MP3/WMA
USB
iPod
For detailed information on the above functions,
see the operation instructions for each related
audio source.
Press the [MODE] button when the
1
main unit is switched to any audio
mode.
Rotary mode will switch ON. When
rotary mode is set to ON, the rotary
indicator will be displayed as follows.
18
Function Page
34
79
DOWN
82
DOWN
27
FILE search 27
FILE search 27
Track search 86
If the [MODE] button is pressed again,
or if no operations are performed for
more than 10 seconds, rotary mode
will be canceled.

Creating a shortcut

Create a shortcut for frequently-used functions
so that they can be recalled with a single
operation.
A shortcut can be created for one of the following
MENU mode adjustment
adjustment mode, display adjustment mode, or
function mode.
Switch the adjustment function
1
that corresponds to the shortcut.
See the explanation for each adjustment
mode for more information on switching them.
• Sound Adjustment Mode: Page 54
• Display Adjustment Mode: Page 63
• Function Mode: Page 69
Press the [CUSTOM/MENU] button
2
for more than one second.
A shortcut is created. If the [CUSTOM/
MENU] button is held for less than one
second, the previously set adjustment
function will be recalled.
ATTENTION
• If you attempt to create a shortcut for an
invalid hierarchy, the system will beep twice
when [CUSTOM/MENU] button is pressed
for more than one second.
• It may not be possible to operate the
shortcut function in certain audio modes or
due to other system settings. In this case,
the system will beep twice when [CUSTOM/
MENU] button is pressed.
rotary indicator
functions: sound