Detaching the Table-Top Stand from the LCD Monitor
To detach the Table-Top Stand from the LCD Monitor, remove the screws
FW-85BZ35F
FW-75/65/55BZ35F
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the
LCD Monitor.
• Be sure the LCD Monitor is vertical before turning on. To avoid uneven picture uniformity do not power on
the LCD Monitor with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the LCD Monitor.
.
US
13
US