Setting Up; Connecting The Base Station To The Mains; Connecting The Base Station To A Fixed Line Phone; Type 1 - Sennheiser Communications VMX OFFICE Instrucciones De Uso

Setting up

Upon delivery, the headset and the base
station are already paired. You just have
to:
1. connect the base station to the mains
2. connect the base station to your
fixed line phone and/or PC
3. pair the headset to your mobile phone.
Connecting the base station to
the mains
µ
Connect the power supply to the
µ
DC IN socket
All LEDs light up for 2 seconds.
Connecting the base station to a
fixed line phone
Depending on your fixed line phone
system, there are three different ways
to connect the base station:
1. connection to a special fixed line
phone with headset socket
2. connection to a standard fixed line
phone with handset socket
3. connection to a fixed line phone with
DHSG interface
and to the mains.

Type 1:

Connecting the base station to a fixed
line phone with a headset socket
If there is a dedicated headset socket at
your phone, it should be used.
Please refer to your fixed line
phone manual to find out which
socket should be used for con-
necting.
Connect the cable which is already
connected to the base station
(PHONE socket
phone headset socket.
To test the phone connection:
Pick up the handset.
If the dial tone is heard in the
handset, the system is connected
correctly.
) to the fixed line
7