Activating The Device - REFUSOL REFUsol008K Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 57
BA_REFUsol 008K-023K_V04.0_WW
6. Use the "▼" and "▲" keys to select the desired menu language.
7. Press "
The menu switches to the language selected.
The display will be empty at first.
8. Press "ESC" to return to the menu.

4.3 Activating the Device

Verify that the device is connected to line voltage. If not, insert the external power fuse or turn on
the circuit breaker.
Set the DC isolating switch on the
Provided that the solar modules are exposed to sufficient sunlight and that there are no errors or
failures, the device undergoes the following sequence of operations which you can follow on the
display of the control panel:
Self-test:
 All status LEDs are lit for approx. 6 seconds
The initialization cycle is started:
 The "Ready" status LED is flashing
Display:
 PAC
 UAC
 UDC
 State
Initializing has been completed:
 The "READY" status LED emits steady light
Display:
 PAC
 UAC
 UDC
 Switched off
Power-up starts if the solar cell voltage is >350 volts:
 The "READY" status LED is lit; the "ON" status LED is flashing
Display:
 Pac
 Uac
Copyright REFUsol GmbH
" to confirm.
inverter
Feed power in watts (W)
Line voltage in volts (V)
Solar cell voltage in volts (V)
Initializing
Feed power in watts (W)
Line voltage in volts (V)
Solar cell voltage in volts (V)
Feed power in watts (W)
Line voltage in volts (V)
to the ON position.
33

Publicidad

Tabla de contenido
loading

Productos relacionados para REFUSOL REFUsol008K

Este manual también es adecuado para:

Refusol010kRefusol013kRefusol017kRefusol020kRefusol020k sciRefusol023k ... Mostrar todo

Tabla de contenido