Publicidad
Idiomas disponibles
Idiomas disponibles
KEEP MACHINE
CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp
cloth. NEVER use solvents to clean plastic parts. They
could possibly dissolve or otherwise damage the material.
Wear certified
safety equipment
for
eye, hearing and respiratory protection while
using
compressed air.
FAILURE
TO START
Should your machine fail to start, check to make sure
the prongs on the cord plug are making good contact
in the outlet. Also, check for blown fuses or open circuit
breakers in the line.
LUBRICATION
& RUST PROTECTION
Apply household floor paste wax to the machine table,
extension table or other work surface weekly. Or use a
commercially
available protective product designed for
this purpose. Follow the manufacturer's
instructions
for
use and safety.
To clean cast iron tables of rust, you will need the
following
materials: a sheet of mediurr_Scotch-Brite
TM
Blending Hand Pad, a can of WD-40
and a can of
degreaser. Apply the WD-40 and polish the table surface
with the Scotch-Brite
pad. Degrease the table, then apply
the protective product as described above.
REPLACEMENT
PARTS
Use only identical replacement parts. For a parts list or to
order parts, visit our website at servicenet.deltamachiner3&,
corn. You can also order parts from your nearest factory-
owned branch, or by calling our Customer Care Center at
1-800-223-7278 to receive personalized support from highly-
trained technicians.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about Delta Machinery,
its factory-owned
branches, or an Authorized Warranty
Service Center, visit our website at www.deltamachinery_,
corn or call our Customer Care Center at 1-800-223-7278.
All repairs made by our service centers are fully guaranteed
against defective material and workmanship. We cannot
guarantee repairs made or attempted by others.
You can also write to us for information at Delta Machinery,
4825 Highway 45 North, Jackson, Tennessee 38305 -
Attention: Product Service. Be sure to include all of the
information shown on the nameplate of your tool (model
number, type, serial number, etc.)
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and
Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com
for a catalog or for the name of
your nearest supplier.
Since accessories
other than those offered by Delta have not been tested with this product, use
of such accessories
could be hazardous.
For safest operation,
only Delta recommended
accessories
should be
used with this product.
23
Publicidad
