Short Description - Leuze electronic MSI 200 Serie Manual De Usuario

Programmable Safety Controller
A1/A2: Supply voltage for logic
24 V/0 V: Output supply
Status LEDs
LEDs for showing the
status at the safe inputs/
outputs
Safe inputs
Safe outputs
Snap-on foot for fixing
to the DIN rail
Approval:
TÜV applied for

1. Short description

MSI 200 is a freely programmable safety controller
with 20 safe inputs and 4 safe outputs. It also
features four monitoring outputs, two clock outputs,
and two ground switching outputs.
The module can be extended by secure in- and out-
put as well as fieldbus gateways.
14
Ground switching outputs
voltage
UL Listed/CUL Listed
(applied for)
ENGLISH
M0 to M3: Standard monitoring outputs
T0 to T1: Test pulses for
MSI 202
The safety controller evaluates different types of
safety equipment such as emergency stop buttons
or safety doors. The required safety functions are
freely programmable with the MSIsafesoft
software.
The safety controller can be used in safety circuits
as per EN 60204-1 and is suitable up to:
- Category 4 (EN 954-1)
- SIL 3 (IEC 61508)
- SILCL 3 (EN 62061)
- PLe (EN ISO 13849-1)
MSI 200
cross-circuit detection
Data memory module
AC-MSI-CFG1
"Confirm" button
USB port
DIN rail connector
Fig. 1