Operating Instructions; Control Functions - Admiral AAWV-12CR1FAU Manual De Uso Y Mantenimiento

AC 12 10 8 6 MAN final

OPERATING INSTRUCTIONS

4.CONTROL PANEL(Only for electronic models)
Caution: If air conditioner is shut off, wait a minimum of three minutes before restarting

Control Functions

Air Exchanger: Circulates fresh air and helps remove stale air when in the open position. Maximum air circulation and
cooling occur when in the closed position.
ON/OFF button
The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press
this button.
MODE button
Each time MODE button is pressed, the operation mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
NOTE: After setting the mode, allow 3 minutes before switching to another mode.
FAN SPEED button
Used to select fan speed in sequence auto, low, medium and high.
TIMER button
TIMER button
Used to set or cancel timer operation.
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER. When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER.
Timer setting range is 0 to 24 hours. Timer setting range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature.
If you press TIMER button within the 12 seconds, OFF TIMER will be canceled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit.
If you want to cancel ON TIMER, press TIMER button.
Button
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
Used to set room temperature in COOLING mode or used to set time in TIMER mode.
If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F.
If the two keys are pressed at the same time,the temperature LED display will alternate between
NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F).
NOTE: Temperature setting range is from19
Indication symbols of LED on control panel:
Auto fan speed
Low fan speed
Medium fan speed
High fan speed
The above LED lights are shown when the relevant mode is in use.
3/2/05 12:55 PM Page 11
Cooling
F
HR
Fan only
Display set temp
Display set timer
Timer
Energy-saving
(66 ) to 31 (88 ).
9
and .