Special Safety Instructions - Metabo SXE 425 TurboTec Instrucciones De Manejo

d)Store idle power tools out of the reach of
children and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e)Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
5) Service
a)Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.

3. Special Safety Instructions

Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Use a dust extractor or the dust collection box
where possible.
- To achieve a high level of dust collection, use a
suitable Metabo vacuum cleaner together with this
tool.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Wear ear protectors when working for long periods
of time. High noise levels over a prolonged period of
time may affect your hearing.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
SYMBOLS ON THE TOOL:
....... Class II Construction
V .......... volts
A .......... amperes
Hz ........ hertz
~
.......... alternating current
n ......... no load speed
0
../min ... revolutions per minute
rpm ..... revolutions per minute
opm .... oscillations per minute
4. Overview
See page 2.
1 Sanding disc
2 Support plate
3 Additional handle (removable)
4 Knurled screw
5 Setting wheel for selecting oscillating frequency
6 TurboBoost switch
7 Locking button for continuous activation
8 Trigger switch
9 Locking button for
"Duo" oscillating circuit setting *
10 Hexagon spanner
11 Button for removing the dust collection box
12 Dust collection box
13 Cleaning flap
14 Fluted filter
15 Locking screw for support plate
16 Braking ring of support plate brake
* depends on model
5. Commissioning
Before plugging in, check to see that the rated
mains voltage and mains frequency,
as stated on the rating label, match your power
supply.
5.1 Additional handle
The removable additional handle (3) can be
screwed onto the machine with the integrated
knurled screw (4).
If required, insert a Phillips screwdriver in the hole at
the end of the additional handle to release or tighten
the knurled screw (4).
5.2 Installation of sanding disc
Simple attachment and removal thanks to the
velcro-type fastening.
Simply press on the sanding disc such that the
holes in the sanding disc (1) are aligned with the
support plate (2).
ENGLISH en
5