Special Safety Instructions; Initial Operation; Installation Of Sanding Disc; Setting Oscillating Frequency - Metabo SRE 4350 TurboTec Instrucciones De Manejo

the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e)Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
5) Service
a)Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained.

3. Special Safety Instructions

Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Use a dust extractor or the dust collection box
where possible.
- To achieve a high level of dust collection, use a
suitable Metabo vacuum cleaner together with this
tool.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-
mended.
Follow national requirements for the materials you
want to work with.
Pull the plug out of the plug socket before any adjust-
ments or servicing are performed.
Wear ear protectors when working for long periods of
time. High noise levels over a prolonged period of
time may affect your hearing.
Materials that generate dusts or vapours that may be
harmful to health (e.g. asbestos) must not be
processed.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
SYMBOLS ON THE TOOL:
.......Class II Construction
V...........volts
A ..........amperes
Hz ........hertz
W .........watts
~
.......... alternating current
rpm ...... revolutions per minute
.../min... revolutions per minute
opm .... oscillations per minute
4. Overview
See page 2.
1 Additional handle (removable)
2 Setting wheel for selecting oscillating frequency
3 TurboBoost switch
4 Lock button for continuous activation
5 Trigger
6 Dust collection box
7 Cleaning flap
8 Fluted filter
9 Sanding disc *
10 2 clamping elements
11 Sanding plate
12 Extractor connection piece
* depending on equipment/not in scope of delivery

5. Initial Operation

Before plugging in the device, check to see that
the rated mains voltage and mains frequency,
as specified on the rating label, match your power
supply.
5.1 Additional handle (removable)
If necessary, you can unscrew the additional handle
(1) (right-hand thread).
5.2

Installation of sanding disc

Sanding sheet with velcro-type fastening
Simple attachment and removal thanks to the velcro-
type fastening. Simply press on the sanding disc
such that the holes in the sanding disc (9) and
sanding plate (11) are aligned.
Sanding sheet without velcro-type fastening
Secure the sanding disc using a clamping element
(10). Pull the disc across the sanding plate (11) so it
is taut; then fasten in place with the other clamping
element
6. Use
6.1 On/Off switch, continuous activation
To start the machine, press the trigger (5).
For continuous operation the trigger can be locked
with the lock button (4). To stop the machine, press
the trigger (5) again.
6.2

Setting oscillating frequency

When the TurboBoost switch (3) is switched off, the
oscillating speed can be set at the setting wheel (2).
This is also possible during operation.
Recommended oscillating frequency settings:
Plastic materials . . . . . . . . . . . . . . . . . . . . . 1-2
Metal, Plexiglas ® , old coats of paint . . . . . 3-4
Coarse and fine sanding, polishing, wood 5
The best way to determine the ideal setting is
through a practical trial.
ENGLISH en
5