Cleaning; Motor Housing; Heater Box And Cover; Decalcification - Proficook PC-SV 1126 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
WARNING:
• Always turn the device off before cleaning it and remove the
mains plug. Wait until the device has cooled down.
• Do not immerse the motor housing in water for cleaning in any
case. Doing so may result in an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.

Motor Housing

Clean the housing only with a damp cloth and a squirt of
washing-up liquid. Dry with a cloth.

Heater Box and Cover

For thorough cleaning, please remove the heater box.
1. Turn the heater box towards "
motor housing. (See page 4, Fig. B)
2. Remove the cover from the heater box. (See page 4,
Fig. C)
3. Clean these parts in a bowl of hot water. Then dry
everything before assembling the parts again.
NOTE:
During assembly, make sure that the marking
heater box and the symbol on the motor housing are
aligned on top of each other.

Decalcification

• Descale the appliance at regular intervals.
• The frequency of the decalcifying operation depends on
the hardness of the water and on how often the appliance
is used.
• Please do not use vinegar but a commercially available
decalcification agent on the basis of citric acid. Only use
the quantities stated in the instructions.
1. Attach the appliance onto a suitable pan.
2. Fill up the pot with hot water and add a descaling agent.
3. Set the temperature and the timer as described in the
"Use" section.
- Set the maximum temperature.
- Set the timer to a couple of minutes.
4. Repeat the process, as necessary, until the limescale has
completely dissolved.
46
PC-SV1126_IM

Cleaning

• Clean the device as described.
• We recommend that you store the device in its original
• Always store the device at a well ventilated and dry place
" and remove from the
on the
Model:.................................................................... PC-SV 1126
Power supply:....................................... 220 - 240 V~, 50 / 60 Hz
Power rating: ................................................................... 800 W
Protection class: .......................................................................
Circulation pump: ...................... 8 liters per minute at the most
Temperature: .................................................... 0 to 90 °C max.
Temperature stability: ...................................................± 0,1 °C
Suitable pan height: ......................................... 15 cm or higher
Net weight: ....................................................... approx. 1.18 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low

Storage

packaging when it is not to be used for a longer period.
outside the reach of children.

Troubleshooting

Problem
Possible Cause Remedy
The device is not
The device has
working.
no power supply.
The appliance
The device is
switches off
calcified.
prematurely or
the temperature
The water level
protection unit
has dropped
starts up (
).
below the MIN
level mark.

Technical Data

Check the socket
with another
appliance.
Plug in the mains
plug correctly.
Check the main
circuit breaker.
Descale the
appliance as
described.
Fill up with water
and restart the
process.
19.09.16

Publicidad

Tabla de contenido
loading

Tabla de contenido