Settings; Setting The Language Of The Display Text; Setting The Display Contrast; Setting The Date And Time - Topcom ALLURE 200 Manual De Usuario

4 SETTINGS

4.1 Setting the language of the display text.

When you did not change the language during initialisation, you can select it as follow:
• Press the Volume Up / Delete
• Use the Up or Down
• Press the Volume Up / Delete
• If no button is pressed within 10 seconds, the unit will return to standby mode.
!!! Only the words on the 3rd line of the display will be indicated in the selected language. In standby the
display will indicate 'ALL CALLS 000' for indicating the number of stored calls in the call list only in
English.

4.2 Setting the display contrast.

You can select the desired contrast as follows:
• Press the Volume Up / Delete
• Press the Volume Up / Delete
• Use the Up or Down
• Press the Volume Up / Delete button
• If no button is pressed within 10 seconds, the unit will return to standby mode.

4.3 Setting the Date and Time

When you have a subscription to the Caller ID service and your telephone provider sends the date and time together
with the telephone number, the phone's clock will be set automatically. The year must always be set manually.
It is also possible to set the clock manually:
• Press the Volume Up / Delete
• Press the Volume Up / Delete
• Use the Up or Down
• Press the Volume Up / Delete
• Repeat the previous steps for changing and confirming month, day, hour and minutes.
• After confirming the minutes, you will go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
4.4 Setting the Local Prefix (5 digits)
The Local prefix must be set, when you are not allowed to dial out your own area code.
If there is an incomming call, starting with the programmed prefix, the code will not be displayed and not be stored in
the call list.
ex. When 012 is programmed and 0123456789 is the incomming call number, 3456789 is displayed and stored in the
call list.
• Press the Volume Up / Delete
• Press repeatedly the Volume Up / Delete
• Use the Up or Down
• Press the Volume Up / Delete
• Repeat the previous steps for the other digits (max. 5 digits).
When no local prefix is used set (- - - - -).
• After confirming the last digit, you will go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
Topcom Allure 200
/ button for 3 seconds.
to select the desired display language
/ button to go to the next setting.
/ button for 3 seconds, the display language is shown.
/ button again.
button to select the desired display contrast.
/ to go to the next setting.
/ button for 3 seconds, the display language is shown.
/ button 2 times. The year will blink.
button to select the year.
/ button confirm the year and change to month.
/ button for 3 seconds, the display language is shown.
/ button until 'SET LOCAL CODE ' is display.
button to select the first digit of the local code (0-9 or '-' to unselect)
/ button confirm the first digit and change next digit.
Topcom Allure 200
5