Memory Numbers; Adding A Number To A Direct Memory; Calling A Direct Memory Number; Sleep Mode - Topcom ALLURE 200 Manual De Usuario

Ocultar thumbs Ver también para ALLURE 200:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

8 MEMORY NUMBERS

You can program 8 Direct numbers (max 16 digits). These memory numbers can be dialled by pressing M1-M8.

8.1 Adding a number to a Direct Memory

Press M1 for 2 seconds.
Enter the telephonenumber.
Press the desired Direct Memory key (M1-M8)
Direct memories can only be overwritten not erased.

8.2 Calling a Direct Memory number

Press the desired Direct Memory key, the stored number is displayed.
Press handsfree
or pick up the handset.

9 SLEEP MODE

To avoid that you are disturbed during a specific period, you can activate the sleep mode. The telephone will not ring
during sleep mode, except for calls dedicated as VIP in the call list. VIP calls will always ring.
Once the sleep mode time is past, the telephone will always ring.
Press the Music on Hold/Sleep button
Press the Sleep button
Press the dial key
To disable the sleep mode, follow the same steps and select 00-00

10 ALARM

The allure 200 has an alarm function.
To set the alarm
Press the alarm button for 2 seconds
Press the Up
or Down
Press the alarm button to confirm
Press the Up
or Down
Press the alarm button to confirm
To activate/deactivate the alarm
Press the alarm button briefly to switch the alarm On or Off.
When ON, the alarm icon
The alarm sound is the same melody as the 'music on hold' melody (see 5.3)
When the alarm sound is heard, press the handsfree button

11 SAFETY INSTRUCTIONS

Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from a water source. Keep water
away from the telephone.
Do not use the telephone in environments where there is a risk of explosions.
Dispose of the batteries and maintain the telephone in an environment-friendly manner.

12 CLEANING

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive
solvents.
Topcom Allure 200
for 2 seconds
repeatedly to select the sleep time (0-24 hours in steps of 1 hour)
to confirm the setting
button to select the hour
button to select the minutes
is shown on the display.
twice, otherwise the melody will continue for one minute.
Topcom Allure 200
9

Publicidad

Tabla de contenido
loading

Tabla de contenido