Ironing Without Steam - Bosch Sensixx B45L Instrucciones De Uso

Temperature icon on
display
3. The selected temperature icon will flash while the
soleplate (16) is heating and will stop flashing as
soon as the soleplate has reached the selected
temperature.
Tips:
• Sort your garments out based on their cleaning
symbol labels, always starting with clothes that
have to be ironed at the lowest temperatures.
• If you are not sure what the garment is made
of then begin ironing at a low temperature and
decide on the correct temperature by ironing a
small section not usually seen when worn.
C
Ironing with steam
The steam control is used to adjust the amount
of steam produced when ironing.
By default, the steam station automatically chooses
the "i-Temp" steam setting.
The steam setting can be changed by the user by
changing the temperature. The steam station will
propose the suitable steam level automatically.
Temperature icon
on display
If necessary, the steam level can be adapted to your
needs by touching the
The selected icon flashes until the pressure
corresponding to each steam level is reached.
Steam is now ready to be released by pressing the
steam release buttons (13 or 14*).
Attention:
• When ironing on a lower temperature setting
only press the steam release button (13) for a few
seconds at a time.
Suitable for:
any type of fabric which
can be ironed.
dark and delicate
fabrics. Reduces the
risk of shiny marks.
synthetics.
silk – wool.
cotton – linen.
Steam setting
icon on the display (8).
If you find that water is dripping out of the
soleplate, set the temperature to a higher position
(take care that the garment can be ironed on
this heat temperature setting).
• At the beginning of each use, it is possible that
drops of water will be dispensed alongside steam.
Therefore, it is advisable to try the iron on the
ironing board or a piece of cloth to start with.
Tip : for better ironing results, iron the last strokes
without steam to dry the garment.
"PulseSteam"
function
This appliance has a special function for tackling
difficult creases. The "PulseSteam" function helps
soften stubborn garments like jeans or a linen
tablecloth faster.
When the steam release button is activated, the
steam generator will release three powerful shots of
steam so that the steam reaches even deeper into
the fabrics.
1. Set the temperature to the
2. Press the steam release button (14*) on the top
of the handle.
or (model dependent)
Quickly press the steam release button (13) on the
bottom of the handle twice (double-click)
Remarks:
• It is possible to stop the shots of steam by quickly
pressing the steam button again.
• Some water drops may appear when you use the
"PulseSteam" function for the first time. The water
drops will disappear after you have used the
function for some time.

Ironing without steam

This enables the iron to be used for dry ironing.
Begin ironing but without pressing the steam release
buttons (13-14*).
,
setting.
19
BOS CH