Cobra PRO Instrucciones De Seguridad Y De Funcionamiento página 9

COBRA PRO, TT, TT-AWD
Avoid contact with the warm exhaust pipe or the
►
bottom of the machine.
DANGER Fuel hazard
The fuel (petrol and oil) is extremely flammable and
petrol fumes can explode when ignited, causing
serious injury or death.
► Protect your skin from contact with the fuel. If fuel
has penetrated the skin, consult a qualified health
professional.
Never remove the filler cap, and never fill the fuel
►
tank when the machine is hot.
Mix the fuel and fill the fuel tank outdoors or in a
►
clean and well ventilated place, free from sparks
and open flames. Fill the fuel tank at least ten
meters (30 feet) from the place where the machine
is to be used.
► Release the filler cap slowly to let pressure
escape.
Never overfill the fuel tank.
►
Make sure the filler cap is screwed on when the
►
machine is used.
► Avoid spilling fuel on the machine, wipe off any
spilled fuel.
Check regularly for fuel leaks. Never use the
►
machine if it is leaking fuel.
Never use the machine in the proximity of material
►
that can generate sparks. Remove all hot or
spark-generating devices before starting the
machine.
► Never smoke when filling the fuel tank or when
working with the machine or servicing it.
► Only store fuel in a container that is specially
constructed and approved for the purpose.
Consumed petrol and oil containers must be taken
►
care of and returned to the retailer.
Never use your fingers to check for fluid leaks.
►
© 2010 Atlas Copco Construction Tools AB | No. 9800 0956 90a | 2010-01-01
Original instructions
Safety and operating instructions
WARNING Unexpected movements
The inserted tool is exposed to heavy strains when
the machine is used. The inserted tool may break
due to fatigue after a certain amount of use. If the
inserted tool breaks or gets stuck, there may be
sudden and unexpected movement that can cause
injuries. Furthermore, losing your balance or slipping
may cause injury.
Make sure that you always keep a stable position
►
with your feet as far apart as your shoulder width,
and keeping a balanced body weight.
Always inspect the equipment prior to use. Never
►
use the equipment if you suspect that it is
damaged.
Make sure that the handles are clean and free of
►
grease and oil.
► Keep your feet away from the inserted tool.
Stand firmly and always hold on to the machine
►
with both hands.
Never start the machine when it is lying on the
►
ground.
► Never 'ride' on the machine with one leg over the
handle.
Never strike or abuse the equipment.
►
Check regularly for wear on the insertion tool, and
►
check whether there are any signs of damage or
visible cracks.
► Pay attention and look at what you are doing.
9