How to run a self-cleaning cycle
Select the length of time for the self-cleaning operation, eg. 3 hours.
1.
Touch Self Clean 2/3/5h once for a 3 hour clean time, twice for a 5 hour clean
time, or 3 times for a 2 hour clean time
The default setting is 3 hours.
2.
Touch START/SET to start the self-cleaning cycle.
The motor-driven door lock will engage automatically.
NOTE
•
You will not be able to start a self-cleaning cycle if the Control Lockout
feature is activated or if the oven's temperature is too hot.
•
The oven door locks automatically. The display will show the cleaning
time remaining. You cannot open the oven door until the temperature
drops to a safe/cool temperature.
3.
When the self-cleaning cycle is done, End will appear in the display and the
oven will beep 3 times.
NV51R5511S_AA_DG68-01125A-00_EN+MES+CFR.indb 27
How to delay the start of self-cleaning
Touch Self Clean 2/3/5h.
1.
Select the desired self-clean time by touching Self Clean 2/3/5h.
2.
Touch Delay Start.
3.
Enter the time you want the self-clean cycle to start.
4.
Touch START/SET.
The display will show Delay, Self clean, and the Lock icon. The motor-driven
door lock will engage automatically.
The Self-Cleaning cycle will turn on automatically at the set time.
5.
How to turn off the self-cleaning feature
If you need to stop or interrupt a self-cleaning cycle:
1.
Touch OVEN OFF.
2.
You will be able to open the oven door once the oven has cooled down for
approximately 1 hour.
After a self-cleaning cycle
•
You may notice some white ash in the oven. Wipe it up with a damp cloth
after the oven cools. (If white spots remain, remove them with a soap-filled
steel wool pad and rinse thoroughly with a vinegar and water mixture.)
•
If the oven is not clean after one cycle, repeat the cycle.
•
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
English 27
3/13/2019 2:11:08 PM