SOLAC CT8665 Instrucciones De Uso página 10

Ensure that the electronic connector is proper-
•
ly attached to the appliance. (Fig. 1)
Connect the appliance to the mains.
•
Turn the appliance on, by using the selection
•
knob.
Activate the temperature selector button. It will
•
start at level 0 (no heating). Continue to press
the button to increase the temperature up to 3,
the maximum level.
As a security measure, the appliance is pro-
•
grammed to turn off automatically after 90 min.
of continuous use. If the appliance is stopped
in this way, press the power switch again to
reheat.
Select the desired temperature.
•
STAND-BY FUNCTION:
In order to save energy, the appliance passes
•
to stand-by after 90 minutes if the user does
not use it.
To return to normal operation simply activate
•
the appliance's on/off button.
ONCE YOU HAVE FINISHED USING THE AP-
PLIANCE:
Stop the appliance using the on/off switch. (Po-
•
sition 0)
Unplug the appliance from the mains.
•
Clean the appliance.
•
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
•
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
•
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
The pillow may be washed by hand or on the
•
WOOL or DELICATES setting of the washing
machine- at a temperature of up to 30ºC. Re-
move the control before washing. The control
must never be submerged in water.
Dry the product immediately after any clean-
•
ing task making sure that the appliance inlet is
perfectly dry.
The pillow has a removable inner padding that
•
can be washed by hand or machine at a tem-
perature that does not exceed 30 ºC.
Do not use the pad if the removable cover is
•
not completely dry.
Never submerge the connector in water or any
•
other liquid or place it under running water.
WHEN NOT IN USE, STORE AS FOLLOWS:
Let the appliance cool down before putting it
•
away.
When the appliance is not in use, keep in a dry
•
place and avoid placing heavy objects on top
as they could damage the cables.
Avoid creases forming. Check the appliance
•
and power cord frequently to make sure they
are in perfect condition.
ANOMALIES AND REPAIR
Take the appliance to an authorised technical
•
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
The materials of which the packaging of this
•
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
The product does not contain concentrations
•
of substances that could be considered harm-
ful to the environment.
This symbol means that in case you wish
to dispose of the product once its working
life has ended, take it to an authorised
waste agent for the selective collection of
Waste from Electric and Electronic Equipment
(WEEE).
This appliance complies with Directive 2014/35/
EU on Low Voltage and Directive 2014/30/
EU on Electromagnetic Compatibility, Directive
2011/65/EU on the restrictions of the use of
certain hazardous substances in electrical and
electronic equipment and Directive 2009/125/
EC on the ecodesign requirements for ener-
gy-related products.
EN