Other Functions; Using An Aux Source; Switching The Display Indication And Button Illumination - Pioneer DEH-6250BT Manual De Instrucciones

Section
Operating this unit
02
1 Press M.C. to turn the demo display on or off.
! You can also turn on or off feature demo by
pressing /DISP/SCRL while this unit is
turned off. For more details, refer to Demo
mode on page 4.
Ever SCRL (scroll mode setting)
When Ever Scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press M.C. to turn the ever scroll on or off.
BT clear (resetting the Bluetooth wireless technology
module)
Bluetooth telephone data can be deleted. To protect
personal information, we recommend deleting this
data before transferring the unit to other persons. The
following settings will be deleted.
! phone book entries on the Bluetooth telephone
! preset numbers on the Bluetooth telephone
! registration assignment of the Bluetooth tele-
phone
! call history of the Bluetooth telephone
! information of the connected Bluetooth telephone
1 Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, push
M.C. left. The display reverts.
2 Press M.C. to clear the memory.
Cleared is displayed and the settings are deleted.
! While this function is in use, do not turn off
the engine.
BT VER INFO (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press M.C. to display the information.
S/W update (updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
! Never turn the unit off while the software is being
updated.
1 Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
20
En
Black plate (20,1)

Other Functions

Using an AUX source

1 Insert the stereo mini plug into the
AUX input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
(auxiliary input) on the previous page.
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
% Press and hold S.Rtrv/DISP OFF.
Pressing and holding S.Rtrv/DISP OFF
switches the display indication and button illu-
mination on or off.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
<YRD5316-B/S>20