Beta ALP 125 Manual De Instrucciones página 134

4
ADJUSTING THE BRAKES
Front brake
The front brake is a hydraulically oper-
ated disc brake, and therefore requires
no adjustment.
Back brake
The back brake is a hydraulically-
operated disk brake, so it needs no
adjustment.
ADJUSTING THE CLUTCH
The only operation that may be required
is the adjustment of the position of clutch
lever E.
The adjustment is obtained by means of
adjuster D.
After adjusting the lever with the adjust-
ing screw, be sure to tighten stop F so as
F
to lock the screw in the desired position.
E
D
Note
The play of the clutch should range from
0.4 to 0.6 mm.
GB
60