Connect Wiring; Reinstall Hybrid Filters - Best ICB3I SERIE Manual De Usario

10. CONNECT WIRING

Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance with all applicable
codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting
means to prevent power to be switched on accidentally.
1. Connect hood power cable to house wiring using provided wire connectors:
BLACK to BLACK, WHITE to WHITE and GREEN or BARE wire to GREEN
ground screw. DO NOT FORGET TO CONNECT THE GROUND.
Reinstall electrical box cover ensuring its 3 tabs are tucked inside the electrical
channel.
2. Connect blower.

11. REINSTALL HYBRID FILTERS

Remove protective plastic film covering filters before reinstalling them.
Rest rear filters edge on filter springs in the range hood. Tilt up the filters into
position. Make sure filter tabs are securely engaged in range hood front edge slots
after installation.
WARNING
!
G
CAUTION
11
ROUND
SCREW
HE0061
C
ONNECT
BLOWER
HE0060
F
ILTER TABS
HO0350