Blackstone 1610 Manual Del Usuario página 7

Step 4
Repeat the leg assembly step for the second leg.
Once the legs are installed, the handle of the DASH can be lifted and placed into leg position.
Step 5
Once the back leg is into position, swing the locking brace into place.
To secure the back leg, the support brace must snap into the holding slot located on the telescopic leg.
Support Brace
12
Step 6
With the legs secured in place, lift and place the DASH upon it's feet.
Open the grill hood and hang the grease cup on the outside of the body. Place the grill into the body,
with drain spout facing outward, above the grease cup.
Handle
Step 7
Screw in gas regulator. Lightly tighten with a wrench. Even when tightened the regulator will still pivot.
The regulator will need to be removed and stored in the DASH body after each use.
Gas Regulator
13