Cleaning The Machine - Krups XP4000 Manual Instrucciones De Uso

Ocultar thumbs Ver también para XP4000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

reset the selector to the O setting and
remove the container.
For liquids other than water, turn the selec-
tor to the setting
cleaning operation in order to prevent any
blockage of the opening of the cappuc-
cino accessory :
place a container with water below the
cappuccino accessory.
select the
setting again (16) to remove
the residue of the liquid.
turn the selector to the setting O.
clean the cappuccino accessory with a
damp cloth.
For more thorough cleaning of the
cappuccino accessory, please refer to the
paragraph on maintenance.

Cleaning the Machine

Cleaning the Machine
- N ever wash your espresso machine
accessories in the dishwasher.
After use, the water container must be
emptied.
. Drip tray
This must be emptied after using the ap-
pliance by taking off the grid (18). If several
espressos are being prepared one after the
other, the drip tray should be emptied from
time to time (about once every  - 8 espres-
sos). The presence of water is normal and
does not signify a leak. If necessary, clean
the drip tray and its grid with water and a
little non-abrasive washing-up liquid, rinse
and dry. When reassembling the machine,
ensure that the plastic lining is in the right
place (19).
. The brewing head, the fi lter basket and
the fi lter holder
These must be cleaned after each use. All
you need to do is wipe a damp cloth over
the brewing head of your appliance and to
wash the other accessories in water and a
little non-abrasive dishwashing liquid, rinse
and dry.
Put the fi lter holder with the empty fi lter in
place (6) (7) and push the brew button to
purge and clean the fi lter of coffee sedi-
ment.
12
(15) for the following
If the brewing head is heavily clogged up,
unscrew the grid using a coin, clean it and
refi t it, pressing down fi rmly (20).
When your espresso machine is not being
used, do not leave the fi lter holder in the
appliance to prevent wear on the gasket.
. The cup warming plate: remove this to
clean it with water and a little non-abrasive
dishwashing liquid, rinse and dry.
. The cappuccino accessory
For more thorough cleaning the cappuccino
accessory can be dismantled from the
appliance.
Cappuccino accessory has to be cleaned
properly after each use.
Descaling
Descaling
Descalling is necessary to keep your
espresso machine running effi ciently.
As a result descaling of your espresso
machine should be done fairly frequently
with citric or tartaric acid.
Use caution when descaling your espres-
so machine as the acid substance within
the descaling poweder may damage
countertops or any other surface it comes
in contact with.
However, we would advise you to use the
reference solution as N° F054 that is avail-
able from Krups. Descaling depends on
the hardness of the water, but also on the
frequency of use.
To descale, follow the following method:
Unscrew the grid from the brewing head of
the appliance and clean it (20).
Dissolve a packet of KRUPS descaling
solution in 1 oz/510 ml of lukewarm water
and pour the whole batch into the empty
water container.
Place a container under the brewing head.
Run through about 1/3 of the liquid imme-
diately, setting the selector to the position
(9).
Stop the appliance, leaving the position
(9) engaged and wait for 10 - 15 minutes
to allow the descaler to take effect.
Next, start the machine again and allow
the rest of the liquid to run through.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xp4020Xp4030

Tabla de contenido