Skytec STC-55 Manual De Instrucciones página 2

IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Controller function
1.JOG&SHUTTLE WHEELS
Search :Touch the dial and rotate it to navigate the track ,Press the jogmode button and the light is illuminate first.
Pitch:During playing ,rotate the dial to adjust the pitchbend
Cue point: In pause state ,Rotate the dial can navigate the track and once you enter a point which you desired then press
play/pause button and the CUE button light blink three times. Record the point successfully. Nofe:(Rotate the
dial ,clockwise is forward,couniclockwise is backward)
2.PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.
3.CUE BUTTON
To define and record a return point from which playback it again.
4.PITCH BEND+BUTTON
The pitch speeds up when the+button is pressed and re turn to the original pitch when it is released.
5.PITCH BEND 一 BUTTON
The pitch will slows down while the 一 button is pressed and return to the original pitch when it is released.
6. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels, Hard left selects channel 1."Hard right" selects channel 2.with
the crossfader centered, both assigned channel are live Use the crossfader for fast and seamless segues from one
selected channel to the other
7.SCRATCH MODE
When the (10) is illuminated the wheel is in SCRATCH mode,you may press the SCRATCH button to exit SCRATCH
mode.
8.JOG MODE
When the (10) is illuminated the wheel is in SCRATCH mode,you may press the SCRATCH button to exit SCRATCH
mode.
9. When you enter into SCRATCH WORK MODE.the lamp can light.
10.When you enter into JOG MODE WORK MODE.the lamp can light.
11.FOLDER/TRACK SEARCH
Allows you to navigate through folders or tracks similarly in either USB or CD mode. When navigating a standard CD
turn the rotary to the right to advance the selection or turn the rotary to the left to decrease the selection.
12.when you enter into SD work mode.the lamp can light
13.when you enter into USB work mode.the lamp can light