Warranty Conditions - Skytec STC-55 Manual De Instrucciones

46. DJ MIC
Plug XLR type microphone plug in here.
47. USB
Connect with the computer, record the playing music into this computer or play music from this computer.
48. HEADPHONE JACKS
Used to connect for audio monitoring with headphones.
49. STEREO MAIN OUTPUT
Unbalanced RCAconnectors controlled by the masterfader.
50. INPUT
Plug in the line level device such as tape deck or additional CD player here
51. LINE/PHONO INPUT SWITCH
Use this to allow either line level or phono level equipment to be plugged into your channel inputs.when phono input is
selected, your signal is fed directly to the high-quality RIAA phono pre-amplifiers. Line level sources will overload the
sensitive phono pre-amps and will sound very bad, so always be sure to toggle the line/phono switch over to line
before connection of line sources.
52. GND
Grounding lug for turntable connection. Always use this connection when using turntables.(your turntable cable should
have a grounding wire)
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed.
The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. Skytec cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

WARRANTY CONDITIONS

Skytec equipment is covered by a 1-year warranty on parts and labour except for faders(90 days).The follwing rules
apply from the day the equipment leaves the factory: The date on the invoice is considered to be the date the warranty
begins. Only companies approved by Skytec are allowed to work on the equipment.Warranty becomes void when other
service technicians open the equipment. During warranty period,defective equipment must be sent by pre-paid mail in
the original box Skytec will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing
cost is to be paid by the recipient. Potentiometers have a limited lifetime and are not covered by the manufacturer for
more than normal use. For all service enquiries,refer to your local distributor,as he is best able to help you.
SPECIFICATIONS:
Power supply:.................................... 220~240VAC / 50Hz (8 Watt)
Dimensions: ................................. 482 x 134 x 120mm (19" x 3HE)
Weight: ........................................................................................ 3kg