Wheels And Gearbox; Environmental Protection; Standard Spare Parts - Viking MB 2 R Manual De Instrucciones

The cooling ribs must always be kept clean
to ensure that the engine is adequately
cooled.

12.6 Wheels and gearbox

The wheel bearings are maintenance-free.
The gearbox is maintenance-free.
12.7 Storage (winter break)
Note the following points when storing the
machine for long periods (winter break):
● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
● Empty the fuel tank and carburettor
(e.g. by running empty).
● Unscrew the spark plug (see engine
instruction manual) and pour approx.
3 cm³ of engine oil into the engine via
the spark plug hole. Turn the engine
several times with the spark plug
removed (pull the recoil starter rope).
Fire hazard!
Keep the spark plug socket away
from the spark plug hole due to the
danger of ignition.
● Screw the spark plug back in (see
engine instruction manual).
● Perform an oil change (see engine
instruction manual).
● Store the machine in a dry and locked
place that is generally free of dust.
Make sure that it is out of the reach of
children.
0478 111 9926 A - EN
13. Transport
13.1 Transporting
Risk of injury!
Observe the section "For your
safety" before transporting. (
Carry the machine only with the
help of a second person. Always
wear suitable safety clothing
(safety shoes, thick gloves).
Detach the spark plug socket
before lifting or transporting.
Lifting or carrying the machine
● A Handlebar installed: Hold the
machine at the front carrying handle (1)
and at the handlebar (2).
● B Handlebar folded down: Hold the
machine at the front carrying handle (1)
and at the lower handlebars (3).
Transporting the machine
Only transport the machine on all
four wheels, on a clean, level load floor.
● Secure the machine against slipping
using suitable fastening materials.
Fasten ropes or straps at the front
carrying handle (1) and at the lower
handlebars (3).

14. Environmental protection

Lawn clippings should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
15
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
4.4)
information in the "Disposal" section
during disposal ( 4.9).
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products.

15. Standard spare parts

Mowing blade (mulching blade)
6357 702 0101
Blade fastening screw
9008 319 9028
Retaining washer
0000 702 6600
The fastening elements for the
mowing blade (e.g. blade fastening
screw, retaining washer) must be
renewed when replacing the blade,
i.e. when installing the blade. Spare
parts are available from a VIKING
specialist dealer.
39