Hinged Cantilever First Part - Kemper 1502199 Instrucciones De Montaje

Hinged Cantilever First Part

Art. Nr.: 1502199
Hinged Cantilever
Assembly
Fig. 2-4
● Mount the bracket (7) onto the wall console
● Position the cantilever (8) into the bottom of the wall console
mount (9) and secure it with the screw (14) so that the cantilever
remains movable.
● Install the pipe bracket (10) onto the hinged tie bar (11).
● Position the hinged tie bar (11) into the top of the wall console
mount bracket (12) and secure it with the screw (15) so that it
remains movable.
● Raise both parts of the swivel arm into a position - the
cantilever (8) is horizontal - in which you can connect both
parts with the clamping screw (13).
● Connect the hinged tie bar (11) and the cantilever (8) with
the clamping screw (13).
● Align the hinged cantilever exactly horizontal by
tightening/loosening the clamping screw (13).
● Tighten the screws (14) and (15) firmly.
2-4