Manual tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 32: Manual tuning
1.
Press and hold the click wheel to activate the
manual station search function.
ð The display shows the [Manual Tune]
(Fig. 32) text.
2.
Turn the click wheel or press the [Next] or
[Previous] buttons to change the frequency
range.
3.
Press the click wheel to confirm your selection.
Automatic tuning
The automatic station search function automatically
creates and saves a station list with up to 30 stations.
The stations are sorted according to the strongest
reception.
Prerequisite:
The DAM/FM antenna is connected.
Fig. 33: FM preset list
1.
Press the [Menu]button.
ð The display shows the [FM Preset List]
(Fig. 33) text.
2.
Press the [Next] button.
ð The display shows the [FM Auto Search] text.
3.
Press the click wheel.
ð The display shows the [Auto Search YES] text.
4.
Press the click wheel again.
ð The automatic search function is started.
After the search is complete, the device will
jump to the first station on the list.
58
11.1.2
Storing FM stations
Fig. 34: Storing FM stations
1.
Set the radio station as described in
matic tuning' on page 57 or
on page 58.
2.
Press and hold one of the station preset buttons
on top of the device or the remote control.
ð The station preset is displayed.
i
You can save up to 6 FM stations.
11.1.3
Retrieving saved FM stations
1.
Briefly press one of the station preset buttons
on top of the device or the remote control.
ð The selected station is played.
11.2
DAB radio
11.2.1
Searching a DAB station
Automatic tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 35: Automatically searching a DAB station
1.
Press the [Menu] button in DAB playback mode.
ð [DAB Full Scan] (Fig. 35) appears in the dis-
play.
2.
Press the click wheel on the device or the [OK]
button on the remote control to activate.
ð The device will now search for available
radio stations and play back the first avail-
able station.
Ä 'Auto‐
Ä 'Manual tuning'
© 2013