Charging The Battery - Invacare Aquatec R Manual Del Usuario

IMPORTANT!
Risk of damage
Damage to the product due to incorrect assembly
of the backrest.
– Make sure that both hooks B of the backrest
engage into the hinges C of the seat plate.
– Make sure that the backrest is folded up to
the end position without exerting force and
noticeable resistance. The end position is
indicated in the following graphic.
R / XL
1574470-D
F
4. Hold the backrest at the center of the head end and
carefully lift it into the end position.
5. Plug the jack socket with the unlocking sleeve C
on the spiral cable B of the hand control A to the
jack plug D until the locking mechanism engages
noticeably.
IMPORTANT!
Risk of damage
– Make sure that the backrest doesn't touch the
bath tub edge.
– Place the bath lift further forwards in the bath
tub, if necessary.

3.4 Charging the battery

The bath lift cannot be used when the battery is charging.
Setup
13