Safety Precautions; Used Symbols - TENTECH MPK-254 Manual De Uso

This equipment should be operated only by qualified and duly trained people,
•
closely observing the corresponding safety regulations and instructions
contained in the present User guide.
It should be checked that the item to be measured is voltage free.
•
Before starting with the measurements, be sure that the battery is well charged
•
and that the line voltage is between specified limits.
Do not connect or disconnect the test leads during the measurement.
•
There are no adjustable parts or parts that can be replaced by the user within the
•
equipment. Taking out the Control Panel in order to have an access to the
internal parts may be dangerous as there are high voltages inside, capable of
causing fatal accidents.
Cleaning of this instrument should be carried out using a soft cleaning liquid,
•
after verifying that it doesn't attack the plastic parts used in the case and in the
Control Panel of this equipment.
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.

Used symbols

Caution, refer to User Guide.
Equipment complies with current EU Directives.
The rubbish bin with a line through it means that in the European Union,
the product must undergo selective disposal for the recycling of electric
and electronic material, in compliance with Directive WEEE 2002/96/EC.

Safety Precautions

4