Intended Use; Technical Data; Machine Features - Festool ETS 125 REQ Manual De Instrucciones Original

ETS 125 REQ
GB
Vibration emission level
(3 directions)
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3

Intended use

The sanders are designed for sanding wood, plas-
tic, stone, composites, paint/varnish, filler and sim-
ilar materials as directed. Metals and materials
that contain asbestos must not be processed.
To guarantee electrical safety, the machine must
not be damp or operated in a damp environment.
The machine must only be used for dry sanding.
The user is liable for improper or non-in-
tended use.
4

Technical data

Eccentric sander
Power
No-load speed
1
Max. speed
Sanding stroke
Sanding pad
Weight (without mains
cable, with sanding pad)
Safety class
1.
Max. speed in the event of faulty electronics.
5

Machine features

[1-1] On/Off switch
[1-2] Plug it-connection
[1-3] Speed control
[1-4] Extractor connector
[1-5] Sanding pad
[1-6] Protector
[1-7] Long-life dust bag
[1-8] Dust bag adapter
[1-9] Handle (insulated gripping surface)
12
2
a = 3,5 m/s
h
2
K = 2,0 m/s
ETS 125REQ
250 W
6000 - 12000 rpm
16000 rpm
2,0 mm
D 125 mm
1,2 kg
/II
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Connecting and detaching the mains power cable -
see Fig. [2].
The switch [1-1] is an on/off switch (I = ON, 0 =
OFF).
 In case of a power failure or if the mains con-
nector is removed, move the on/off switch im-
mediately to the Off position. This prevents un-
controlled restarting.
7 Settings
WARNING
Risk of injury, electric shock

Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
7.1 Electronics
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Constant speed
The preselected motor speed is kept constant
through electronic control. This means that, if the
machine is used as intended (reasonable contact
pressure), a constant sanding speed is achieved.
Setting and adjusting the speed
The speed can be set [1-3] between 6000 and
-1
12000 min using the adjusting wheel.
This enables you to optimise the sanding speed to
suit the material (see chapter 8).