Technical Data; Machine Features; Intended Use - Festool ETS EC 150/3 A EQ Manual De Instrucciones

ETS EC 150
GB
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
4

Technical data

Eccentric sander
Power
Idle speed
Sanding stroke
Sanding pad
Weight (without mains cable, with sanding
pad)
Safety class
5

Machine features

[1-1] ON/OFF button
[1-2] Speed control
[1-3] Sanding pad
[1-4] plug it-connection
[1-5] Extractor connector
[1-6] LED for extractor signal
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Connecting and detaching the mains power cable -
see Fig. [2].
Before switching on the machine make sure
that the bayonet fitting at the power supply
cord is closed fully and locked.
12
3

Intended use

As specified, the sanders are designed for sanding
wood, plastic, composite, paintwork, filler and sim-
ilar materials. The special safety information must
be observed when sanding metal. Material contain-
ing asbestos cannot be processed.
The user is liable for improper or non-in-
tended use.
ETS EC 150/3 A EQ
400 W
6000 - 10000 rpm
3,0 mm
D 150 mm
1,2 kg
/II
ON/OFF button [1-1]
ON Press the ON/OFF button[1-1]
OFF Press the ON/OFF button[1-1]
 When the extractor signal is active, the power
tool cannot be switched on without a connected
extractor hose - see chapter 7.3.
7 Settings
WARNING
Risk of injury, electric shock

Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
7.1 Electronics
The machine features full-wave electronics with
the following features:
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Constant speed
The preselected motor speed is kept constant
through electronic control to ensure a uniform
sanding speed even when under load.
ETS EC 150/5 A EQ
400 W
6000 - 10000 rpm
5,0 mm
D 150 mm
1,2 kg
/II