Intended Use; Technical Data; Functional Description; Compressed-Air Supply And Commissioning - Festool LEX 2 185/7 Manual De Instrucciones

bar bars
lb. pound
mm millimetre
'' inch
kg kilograms
l/min liter per minute
psi pounds per square inch
The compressed air eccentric sanders are suitable
for sanding wood, plastic, metal, stone, compos-
ites, acrylic-based mineral materials, paint/clear
coats, fillers and similar materials.
Materials containing asbestos must not be pro-
Compressed air eccentric
sander
Sanding pad diameter
Drive
Operating pressure (flow
pressure)
Speed
Accessories shown or described are sometimes not
included in the scope of delivery.
[3-1] On/Off switch
[3-2] Speed control
[4-1] Sanding pad
CAUTION
Risk of injury

Make sure that the pneumatic tool is switched off
when you connect the compressed-air supply.

Intended use

Technical data

LEX 2 185/7
7-9/32" (185 mm)
Compressed-air
vane motor
87 psi (6 bar)
6500 - 8000 rpm

Functional description

Compressed-air supply and commissioning

cessed.
Only use with Festool hose system IAS 2 or IAS 3
and Festool sanding pads!
The user is liable for improper or non-in-
tended use.
Compressed air eccentric
sander
Working strokes
Sanding stroke
Air consumption at nominal
load
Weight
Compressed-air processing
The Festool service unit should always be used to
ensure that Festool pneumatic tools function cor-
rectly. Consisting of a filter, control unit, condensa-
tion drain and lubricator, the service unit cleans and
LEX 2 185/7
13000 - 16000 rpm
9/32" (7 mm)
390 l/min
3.5 lbs (1.6 kg)
7