Technical Data; Intended Use; General Safety Instructions - Festool LRS 93 M Manual De Instrucciones

LRS 93
GB
Original operating manual
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Warning of general danger
Manual, read the instructions
Wear protective goggles.
Wear ear protection.
Do not throw in the household waste.
2

Technical data

Compressed air orbital
sander
Drive
Operating pressure (flow pres-
sure)
Speed
Working strokes
Sanding stroke
Air consumption at nominal
load
Sanding base (replaceable)
Weight
3

Intended use

The orbital sanders LRS 93 M and LRS 93 G are
compressed-air tools for sanding wood, plastic,
metal, stone, composite materials, paint/vanish,
fillers and similar material. Materials containing
asbestos must not be processed.
The user is liable for improper or non-in-
tended use.
4 Safety instructions
4.1

General safety instructions

General safety regulations
Warning! Before setting up, using, repairing
and servicing this compressed air tool or re-
placing accessory parts, you must have read and
understood all safety instructions and information.
Ignoring warning notes and instructions may result
in serious injuries.
12
LRS 93 M/G
Compressed-air vane motor
4000 - 7000 rpm
4000 - 14000 rpm
390 l/min
93 x 175 mm
– Only trained and qualified persons are permitted to
set up, adjust and operate this compressed air
tool. Persons without the relevant qualifications
and training are more likely to cause accidents.
– This compressed air tool may not be modified.
Modifications may reduce the effectiveness of
safety devices and pose a greater risk to operating
personnel.
– Keep all of the attached documents and pass on
the documentation if the machine changes owner-
ship.
– Never use a damaged compressed air tool.
– Regularly inspect compressed air tool. The com-
pressed air tool must be marked with clearly legi-
ble rated values and markings. Replacement signs
can be ordered from the manufacturer.
Danger from ejected parts
– In the event the workpiece, accessory or machine
parts break parts may be ejected at high speed.
– Wear impact-resistant protective goggles.
– Wear a helmet when doing overhead work. Also
assess the risks for other people.
– Secure the workpiece. Use clamping devices or a
6 bar
vice to hold the workpiece firmly.
Risk of getting caught
– Wear suitable protective clothing! Do not wear
loose clothing or jewellery. They can be caught by
5 mm
moving parts. Wear a hair net if you have long hair.
Risks during operation
– Wear protective gloves.
– Operating and maintenance personnel must be
1,4 kg
physically strong enough to handle the size, weight
and power of the machine.
– Hold the machine correctly. Prepare to counteract
normal or sudden movements - hold the machine
with both hands.
– Avoid abnormal posture. Ensure secure stance and
keep your balance at all times.
– Enable the command device for starting and shut-
ting down in case of an interruption to the energy
supply.
– The machine can only be operated with abrasives
which were developed for this purpose.
– Wear protective goggles, protective gloves and
protective clothing.
– Check sanding pad before each use. Do not use the
sanding pad if it is torn, broken or has fallen.
– Avoid direct contact with the sanding pad. Wear