Publicidad
Idiomas disponibles
Idiomas disponibles
2.
S P E C I A L S A F E T Y P R E C A U T I O N S - Please note!
This drill rig is intended for commercial use only. It may only be used by trained personnel.
It is intentional used as a stand for fixing diamond core drill for drilling rock, concrete and masonry.
For operation the relevant regulations have to be observed.
3.
T E C H N I C A L D E S C R I P T I O N
The KS 50 is a drill rig which is meant for fixing diamond core drills. The diamond drill rig can be fixed to
the ground and to the wall by means of dowels, vacuum or quick bracing columns. The KS 50 is best
suitable for the WEKA diamond core drills DK 32, SR 35, DK 42, and DK 52.
The core drill exists of a eletric motor with step-down gear. Via the quick connect nipple water is supplied
directly to the drilling tool (diamond core bit) (21). Thus the cutted material is flushed away and the tool
is cooled (wet drilling).
The drilling tool (diamond core bit) (21) is a hollow drill (tube) which is fitted with soldered-on or welded-on
segments impregnated with diamonds.
In the wet use, if necessary, the flushing water is extracted through a water collecting ring (23) by means
of an all-purpose suction unit.
Avoid wet drilling upwards (overhead drilling) (Überkopfbohrungen). If it is indispensable
use a proper working water collecting ring.
3.1
Technical data
Type
Total length
Drill stroke
Core bit diameter max.
Inclination
Machine fixture
Rig foot (LxB)
Weight (without feed wheel)
3.2
Scope of delivery
KS50
-
KS50 E
-
KS50 S
-
KS50 ES
-
Accessories -
4.
P R E P A R A T I O N
Make sure that the drill rig has not been damaged during transport. Check if all components are at hand.
4.1
Fixing the drill rig
The drill rig can depending on the surface of the underground be fixed with dowels, vacuum or a quick
bracing column.
KS50
mm
1030
mm
630
mm
500
deg
45
mm
425 x 280
kg
19,5
Drill rig (1), with brace (5), column head (4), fine feed (11), swing foot kit (7), wheel
kit (6), feed wheel (12), operators manual
Drill rig (1), with head plate and chuck head (15), operators manual
like drill rig KS50, but with steel foot, operators manual
like drill rig KS50 E, but with steel foot, operators manual
Distance plate (10), Vacuum adaptor (28), water collection ring (23), machine
adaptor (8)
KS50E
KS50 S
1030
1030
630
630
500
500
-
45
Quick change plate
425 x 280
475 x 387
18,5
21
7
KS50 ES
1030
630
500
-
475 x 387
20,5
Publicidad
