Scope Of Delivery - Waeco MagicSpeed MS900 Instrucciones De Montaje

_MS-901.book Seite 20 Montag, 3. September 2007 4:33 16

Scope of delivery

Observe the following installation instructions:
Secure the MagicSpeed components installed in the vehicle in such a way
that they cannot become loose under any circumstances (sudden brak-
ing, accidents) and cause injuries to the occupants of the vehicle.
Make sure the driver does not have to reach through the steering wheel
to operate it.
To prevent damage when drilling, check that there is sufficient space on
the other side for the drill head to come out (fig. 2, page 3).
Observe the following instructions when working with electrical parts:
When making electrical connections (fig. 3, page 3), ensure that:
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection
Protect the cables from mechanical wear (for example rubbing against ex-
isting cables) using cable binders or insulating tape.
3 Scope of delivery
No. in
fig. 4, Quantity Description
page 4
1
2
3
–
20
1 Electronic module
1 Main wiring harness
1 CAN bus cable set
– Fastening material
MagicSpeed