Troubleshooting; Disposal Of The Product - NORAUTO HT7735 Instrucciones De Uso

TROUBLE SHOOTING
If you face some technical problem with your charger, please refer to below table for any help.
If below solutions do not provide any help, thanks to bring back your aplliance where you purchased it,
to be checked by after-sales service.
Never repair or modify the product yourself.
PROBLEM
Charger is not working

DISPOSAL OF THE PRODUCT

Selective collection of waste electrical and electronic equipment.
Electrical equipment must not be disposed of with household waste.
Pursuant to European Directive 2012/19/EU on waste electrical and electronic equipment,
and its transposition into national law, waste electrical equipment must be collected
separately and disposed of in designated collection points. Contact the local authorities or the
vendor for advice on recycling.
POSSIBLE REASON
The plug is not well connected to
main socket
Your electrical system has some
problems
Cables are damaged
Battery voltage not correct
(6V or 12V) in lead-acid charging
mode (by pressing STANDARD
button)
Charging mode select incorrectly
Battery voltage level is under 2V
Poor connection between
connectors
Reverse polarity
121
SOLUTION
Firmly connect the power supply to
the main socket
Ask a professional technician to
check your electrical system
Contact after sales service
or professional technician for
inspection and fixing
If the lead-acid battery is not a 6V
or 12V, do not use the charger to
charge it
Select correct battery type correctly
(standard lead-acid or lithium)
The battery voltage is too low and it
cannot be recharged
Reconnect the connectors
Reconnect the clamps or eyelets