Troubleshooting; Disposal Of The Product - NORAUTO HT7101 Instrucciones De Uso

TROUBLE SHOOTING
If you face some technical problem with your charger, please refer
to below table for any help.
If below solutions do not provide any help, thanks to bring back
your aplliance where you purchased it, to be checked by after-sales
service.
Never repair or modify the product yourself.
PROBLEM
Charger is not
working

DISPOSAL OF THE PRODUCT

Selective collection of waste electrical and electronic
equipment.
Electrical equipment must not be disposed of with
household waste.
Pursuant to European Directive 2012/19/EU on waste
electrical and electronic equipment, and its transposition
into national law, waste electrical equipment must be collected
separately and disposed of in designated collection points. Contact
the local authorities or the vendor for advice on recycling.
POSSIBLE REASON
The plug is not well
connected to main
socket
Your electrical system
has some problems
Cables are damaged
Battery voltage not
correct (6V or 12V)
Voltage selector switch
set incorrectly
Battery voltage level is
under 2V
Poor connection
between connectors
Reverse polarity
129
SOLUTION
Firmly connect the
power supply to the
main socket
Ask a professional
technician to check
your electrical system
Contact after sales
service or professional
technician for
inspection and fixing
If the battery is not 6V
or l2V, do not use the
charger to charge or
maintain it
Set the voltage
selector switch
correctly
The battery voltage is
too low and it cannot
be recharged
Reconnect the
connectors
Reconnect the clamps
or eyelets