Troy-Bilt TB4BP EC Manual Del Operador página 7

The completed blower tube should look like Figure 6.
Elbow Tube
Throttle Cables
Hose Clamp
Upper Blower Tube
Throttle Grip
Lower Blower
Tube
Nozzle
ASSEMBLY INSTRUCTIONS
Hose Clamp
Flex Tube
On/Off Switch
Cruise Control
Fig. 6
WARNING:
To avoid serious personal injury, make
sure that the blower tubes are locked in place or firmly
installed.
Adjusting the Throttle Grip
1. Move the throttle grip to a location on the upper blower tube
that is comfortable for you (Fig. 7).
2. Using a Torx® screwdriver, tighten the two screws at the
bottom of the throttle grip (Fig. 8).
Throttle Grip
Upper Blower Tube
Fig. 7
Fig. 8
7