Globaltronics GT-EM01 Manual Del Usuario página 54

• When the ice cream mass becomes very firm, the rotating direction of
the stirring paddle automatically changes. This is a protective function,
so that the motor does not overheat. If the rotating direction changes
constantly, switch the appliance off and remove the ice cream mass.
• The motor will switch off automatically when it overheats. In this case,
switch the device off, remove the plug and allow the motor block to
cool off for at least 1 hour.
• Only use the Ice Cream Maker with the enclosed accessories.
• Do not use any metal items, for example, for removing the finished ice
cream. These can damage the interior of the freezing bowl.
Careful when cleaning
• Remove the plug prior to cleaning the motor block.
• The appliance and the freezing bowl must not be cleaned in the
dishwasher.
• The appliance must not be immersed in water.
• For cleaning the motor block and the outside of the freezing bowl,
please use a soft cloth that has been slightly dampened with water.
• Leave the freezing bowl to warm up to room temperature prior to
cleaning.
• Do not use any aggressive chemical detergents, abrasives, hard
sponges, or similar, for cleaning.
GB
54