Publicidad
Idiomas disponibles
Idiomas disponibles
Slope Sheet
Keys
(2) Keys
Your new tractor
has been assembled
at the factory
with the exception
of those
parts left
unassembled
for shipping
purposes.
TOOLS REQUIRED
FOR
ASSEMBLY
A socket
wrench
set will make assembly
easier.
Standard
wrench
sizes
are listed.
(1) 1/2" wrench
Tire pressure
gauge
(2) 7/16" wrenches
Utility
knife
LABEL
Pliers
When right or left hand is mentioned
in this
manual, itmeans when you are in the operating
position (seated behind the steering wheel).
TO
REMOVE
TRACTOR
FROM
CARTON
UNPACK CARTON
•
Remove
all accessible
loose
parts and
parts
cartons
from carton.
•
Cut along
dotted
lines on all four panels
of carton.
Remove
end panels
and lay
side panels
flat.
•
Check
for any additional
loose
parts or
cartons
and remove.
BEFORE
REMOVING
TRACTOR
FROM SKID
TO CHECK
BATTERY
1.
Lift hood to raised
position.
NOTE:
If this battery
is put into service
after
month
and year
indicated
on label (label
is
located
between
terminals)
charge
battery
for minimum
of one hour at 6-10 amps.
(See
"BATTERY"
in Maintenance
section
of this
manual
for charging
instructions).
•
For battery
and battery
cable installation
see
"REPLACING
BATTERY"
in the
"Service
and Adjustments"
section
in this
manual.
ADJUST
SEAT
1.
Sit in seat.
2.
Lift up adjustment
lever (A) and slide seat
until a comfortable
position
is reached
which
allows
you to press
clutch/brake
pedal all the way down.
3.
Release
lever to lock seat in position.
7
Publicidad
