Electrical Connection - Nilfisk Sopra 260 RRC Instrucciones De Uso

8 Electrical connection

On/Off
The control current outlet (low voltage) is connected to a control
current lead running the length of the pipes. Both ends of the
low-voltage lead are connected to the connection panel on the
vacuum unit. One lead to each outlet. The low-voltage lead
should be connected as informed below.
Location of the outlet for the low-voltage leads:
Bronze/Sopra 100
Bronze/Sopra 100
The connection panel is
located in the bottom of the
vacuum unit.
Connection of the low voltage cables
The low voltage cables that runs along the pipes, is to be
connected to the connector at the vacuum cleaner. Connect
the ends of cables in the electrical sockets, one cable end in
each socket. Secure the low voltage cables by pulling the snap
lockings at the connector, downwards.
Secure the low voltage
cables at the connector
- pull the snap lockings
at the connector
downwards.
Low voltage cable
40
Silver/Sopra 160 /
The connection panel is
located in the top of the
Silver/Sopra 160 and Gold/
Sopra 260
Connector
Low voltage cable
The connection panel for Bronze/Sopra 100
and Silver/Sopra 160
The connection panel at
the low voltage cable located at the panel.
The connection panel for Gold/Sopra 260,
Gold RRC/Sopra 260 RRC
Model have the low voltage cable connector placed to the left at
the panel. These models do also have two extra outlets on the
panel. These outlets are prepered for future functions and are
not in used for the moment.
these models have one connector for
Low voltage
cable
connector
Low voltage
cable
connector